Dryer ( Chemical AKDAC Series )

Chemical AKDAC Series

The two towers are filled with adsorbent material (keeping on the surface, outside). It has been designed to filter H2O molecules by a physical sieve method. The H2O molecules attached to the surface of the adsorbent material can easily be separated from the place where they are attached by the effect of molecular forces. While the 1st tower dries the inlet humid air, it is replaced with the fresh air passing through the 2nd tower in the opposite direction. This is a physical reaction and can be applied numerous times.

Chemical dryers are used in special processes (-70°C).

General features 
► Power: 230-1-50V/Ph/Hz - 50w
► Nominal inlet air temperature: 35
► Regeneration air consumption: 7/15%
► Pressure. Dew point (7 bar): -70oC
► Working/Cleaning: 5min/5min
► Electricity Protection Class: IP55

Specifications

Model	Dew Point	Capacity m3/min	Connection	Length  mm	Width mm	Height mm
AKDAC 33	-70	0.03	R 1 ¼	600	400	400
AKDAC 133	-70	0.14	R 1 ¼	1100	400	400
AKDAC 267	-70	0.28	R 1 ¼	1700	450	400
AKDAC 400	-70	0.43	R 1 ¼	1700	450	400
AKDAC 533	-70	0.57	R 1 ¼	1700	450	400
AKDAC 800	-70	0.87	R 1 ¼	1700	450	400
AKDAC 1000	-70	1.08	R 1 ½	1700	450	400
AKDAC 1200	-70	1.30	R 1 ½	1700	450	400
AKDAC 1600	-70	1.73	R 1 ½	1700	450	400
AKDAC 2000	-70	2.17	R 1 ¾	1900	450	400
AKDAC 2667	-70	2.90	R 1 ¾	1900	450	400
AKDAC 3200	-70	3.47	R 1	1900	650	600
AKDAC 4000	-70	4.34	R 1	1900	650	600
AKDAC 5000	-70	5.43	R 1 ½	1900	650	600
AKDAC 6000	-70	6.52	R 1 ½	1900	650	600
AKDAC 7000	-70	7.61	R 1 ½	2100	1100	800
AKDAC 8000	-70	8.69	R 1 ½	2100	1100	800
AKDAC 9500	-70	10.33	R 1 ½	2100	1100	800
AKDAC 10500	-70	11.41	R 2	2100	1100	800
AKDAC 12000	-70	13.04	R 2	2100	1100	800
AKDAC 16000	-70	17.39	R 2	2100	1100	800
AKDAC 20000	-70	21.74	DN 80	2100	1100	800
AKDAC 25000	-70	27.18	DN 80	2600	1100	800
AKDAC 30000	-70	32.62	DN 80	2600	1200	800
AKDAC 40000	-70	43.49	DN 100	2950	1300	1100
AKDAC 50000	-70	54.37	DN 100	2950	1500	1250
AKDAC 75000	-70	81.55	DN 125	2950	1800	1450